BMW Isetta 300 1956-1962

 

 

 

 

BMW Isetta 300

 

In 1956, the government of the Federal Republic of Germany changed the regulations for motor vehicles. Class IV licences issued from that time onward could only be used to operate small motorcycles and could no longer be used to operate motor vehicles with a capacity of less than 250 cc. At the same time, the maximum capacity allowed for the Isetta's tax category was 300 cc. Class IV licences issued before the change in the regulations were grandfathered and allowed to be used as before.

BMW Isetta 300 interior

BMW Isetta 300 - Sliding Window 4-wheel LHD version

 

This change in regulations encouraged BMW to revise their Isetta microcars. In October 1956, the Isetta Moto Coupe DeLuxe (sliding-window Isetta) was introduced. The bubble windows were replaced by longer, sliding side windows. The engineers had enlarged the single cylinder to a 72 mm (2.8 in) bore and 73 mm (2.9 in) stroke, which gave a displacement of exactly 298 cc; at the same time, they raised the compression ratio from 6.8 to 7.0:1. As a result, the engine power output rose to 10 kW (13 hp) at 5200 rpm, and the torque rose to 18.4 N·m (13.6 ft·lbf) at 4600 rpm. The maximum speed remained at 85 km/h (53 mph), yet there was a marked increase in flexibility, chiefly noticeable on gradients.

The oxidized aluminum kit is for BMW, Jaguar, Mercedes, Volvo, Saab, Volkswagen, and many others.  This flexible deoxidizer lasts indefinitely.  After the surfaces are prepared following the directions on the included DVD, the deoxidizer is applied with the applicator using a flow on motion. The oxidized look immediately disappears, leaving an original factory look.

The kit includes all materials necessary to achieve a professional end result.

 

This Kit is:

$49.95 Plus $10.00 Shipping.

We offer a 30 day money back guarantee.

 

     Rocker Panel Refinishing Kit            

Designed for BMW 3-5-7 Series

 

This highly pigmented, water based polymer is able to be brushed on because it is the consistency of water with an extraordinary ability to cover. Apply with a foam brush, included in the kit, for a seamless end result every time. Dries quickly, maintains detail, and leaves no brush strokes. No Spraying necessary. Kit includes Cleaner, Coating, Brushes, and instructional DVD.

 

This Kit is:

$49.95 Plus $10.00 Shipping

We offer a 30 day money back guarantee.

 

 BMW Isetta 300 interior

BMW Isetta 300 - Sliding Window 4-wheel LHD version

Anodize Stripping Kit

This kit allows you to restore those older anodized aluminum bumpers back to a fresh new look. This kit includes a water based anodize stripper which works quickly to get the old faded anodizing off, and down to the raw aluminum. A durable finishing coat is included along with a full length video, sandpaper, and aluminum polish. Kit treats 2 bumpers. 

 

This Kit is:

$69.95 Plus $10.00 Shipping. We offer a 30 day money back guarantee.

 

Rubber Rebuilder Kit

This kit was designed for older cars which have oxidized and pitted rubber trim pieces. These trim pieces are expensive new, and used ones usually look the same as what you have. Multiple coats of the  water based coating  are applied then sanded, filling all pitts.  A final coat is then applied leaving a satin finish. The coating remains flexible for an indefinite period of time. Kit contains: coating, cleaner, sandpaper, brushes, and instructional DVD.

 

This Kit is:

$39.95 Plus $10.00 Shipping. We offer a 30 day money back guarantee.

Home | Contact Us | Blog | Email: mill1546@comcast.net | Contact Paul Miller: 678-978-6995