BMW X6 (E71) 2008-

 

 

 

 

BMW X6 M

BMW X6 M

BMW X6 M (2009-)

 

The BMW X6 M and X5 M are the first vehicles from BMW M GmbH to have xDrive all-wheel-drive system and automatic transmissions, and are also crossovers as opposed to passenger cars. The X6 M was unveiled at the 2009 New York Auto Show and first went on sale in the 2010 model year.

 

The high-performance M derivative features a twin scroll twin turbo version of the 4.4-liter V8 BMW N63 engine with the Cylinder-bank Comprehensive Manifold (CCM). The engine is rated 555 PS (408 kW; 547 hp) at 6000 rpm and 680 N·m (500 lb·ft) at 1500-5650 rpm.

 

Other features include 6-speed M Sports automatic transmission with aluminum pull-style paddles on steering wheel, M Dynamic Mode feature, 10 mm (0.4 in) lower Adaptive Drive suspension, 4-piston fixed calipers with 15.6" rotor at front and single piston floating calipers with 15.2" rotor at rear, 20-inch alloy wheels with 275/40R20 front and 315/35R20 run flat tires, hill descent control, dynamic stability control, special gills in the front fenders, 20-inch light-alloy wheels.

 

The car can accelerate from zero to 60 mph (0–97 km/h) in 4.5 seconds and 0-62 mph (0–100 km/h) in 5 seconds.[

Model range

 

Petrol engines

 

The first BMW X6 models were released for the North American market in two variants, both powered by twin-turbocharged gasoline engines.

 

The base model is the X6 xDrive35i which is powered by the 225 kW version of the N54 3.0-litre twin-turbocharged inline-six gasoline engine. The top-of-the-line model is the xDrive50i which uses the N63 V8 engine, producing 300 kW.

See also: BMW N54 and BMW N63

2007 BMW Concept X6

      Oxidized Aluminum Kit            

The oxidized aluminum kit is for BMW, Jaguar, Mercedes, Volvo, Saab, Volkswagen, and many others.  This flexible deoxidizer lasts indefinitely.  After the surfaces are prepared following the directions on the included DVD, the deoxidizer is applied with the applicator using a flow on motion. The oxidized look immediately disappears, leaving an original factory look.

The kit includes all materials necessary to achieve a professional end result.

 

This Kit is:

$49.95 Plus $10.00 Shipping.

We offer a 30 day money back guarantee.

BMW X6

The BMW X6 is a mid-size luxury crossover released for sale in the second quarter of 2008 for the 2009 model year by German automaker BMW. The X6 was marketed as a Sports Activity Coupé (SAC) by BMW. It combines the attributes of an SUV (high ground clearance, all wheel drive and all-weather ability, large wheels and tires) with the stance of a coupé (bold styling, dramatic sloping roof).

BMW X6 (E71)

Manufacturer  BMW

Production  2008–present

Assembly  Greer, South Carolina, United States (BMW US Mfg. Comp.)

Kaliningrad, Russia (Avtotor)

Class  Mid-size luxury crossover SAV

Body style  5-door crossover SUV

Layout  Front engine ; 2 Elektro-Synchronengines / four-wheel drive

Engine  3.0 L 306 PS (225 kW) I6 Twin Turbo

3.0 L 235 PS (173 kW) I6 diesel

3.0 L 286 PS (210 kW) I6 diesel Twin Turbo

4.4  L 558 PS (410 kW) V8 Twin Turbo

Transmission  6-speed automatic; 8-speed automatic (ActiveHybrid X6)

Wheelbase  2,933 mm (115.5 in)

Length  2008-09: 4,877 mm (192.0 in)

2010-Present: 192.1 in (4,879 mm)

Width  2008-09: 1,979 mm (77.9 in)

M/ AH: 1,983 mm (78.1 in)

2010-Present: 78.1 in (1,984 mm)

Height  2008-09: 1,696 mm (66.8 in)

M: 1,684 mm (66.3 in)

AH: 1,697 mm (66.8 in)

2010-Present: 66.5 in (1,689 mm)

Related  BMW X5

Origins

 

The concept model debuted at the 2007 Frankfurt Auto Show and the production X6 officially debuted at the 2008 North American International Auto Show in Detroit and Montreal International Auto Show. While slightly longer and wider than the X5, it is significantly lower and seated initially only four, and since 2011, optionally five.

 

It is built in BMW's North American plant in Greer, South Carolina alongside the BMW X5, whose platform it shares. It is dubbed a "Sports Activity Coupé (SAC)" by BMW. A hybrid version, the BMW Concept X6 ActiveHybrid, which will be the first such vehicle from BMW, was also announced. Later, in April 2009, the sporty X6 M version was announced, with a 555 hp (414 kW) 4.4-liter turbocharged V8.

Diesel engines

 

At launch, the X6 was available in many markets with two diesel variant: the xDrive30d and xDrive 35d, respectively. They are powered by BMW's 3.0-litre turbodiesel engine (in its sequential twin-turbocharged variant for the xDrive35d), and produces 235 PS (173 kW) in the xDrive30d and 286 PS (210 kW) in the xDrive 35d version. The second of these power units formed the basis of BMW's diesel launch in all 50 states in late-2008.

 

By 2010, a new 40d was added to the range, replacing the 35d, and in 2012 a new high performance M50d was added, but despite its nomenclature, is still powered by a 3.0-litre engine.

Interior

Engine

 

The engine utilizes BMW’s M TwinPower and patented exhaust manifold technologies to increase thrust and pulling force, while preserving the most compact dimensions possible. Two low-mass twin-scroll turbochargers are positioned together with the catalytic converters in V section between the two banks of cylinders. By reversing the flow of gases through the engine from traditional arrangements, the intake and exhaust ducts are shortened and widened. The result is that pressure losses on the exhaust side are minimized.

 

The goals were to virtually eliminate turbocharger lag while maximizing combustion efficiency and power output. The new M V8 engine with twin-scroll twin turbo technology uses a single exhaust manifold with tuned-length runners, incorporating both cylinder banks and connecting cylinders in carefully selected pairs. This configuration, patented by BMW M and known as Cylinder-bank Comprehensive Manifold (CCM), offers quick response, a linear build-up of engine power, and a broad, consistent torque curve by feeding each of the twin turbochargers with a “charge pulse” at approximately every 90 degrees of crankshaft rotation, rather than the more traditional “irregular schedule” of charging.

 

Coupled with special suspension specifically optimized for M that features Adaptive Drive and the newly developed M Servotronic power steering, the performance Sport Activity Vehicle promises very competent handling. Other high-tech features include launch control for maximum acceleration and a six speed M Sport automatic transmission optimized for performance. Drivers can manually select gears using either paddles or an electronic gear selector lever. Electronically controlled, variable power distribution to the front and rear axle prevents even the slightest tendency to over- or understeer right from the start, before DSC Dynamic Stability Control is even required to cut in. BMW is referring to the new 4.4-liter motor as its “M TwinPower Turbo” unit. The name reflects the fact that the motor features Twin Scroll Twin Turbo Technology and a common exhaust manifold encompassing both rows of cylinders. Although traction control is standard, the M Dynamic Mode (MDM) greatly optimises the aggressiveness of the system. The MDM setting allows the driver to enter a controlled drift and push the vehicle’s handling to the limit. There is also a DSC-Off Mode.

 

BMW Concept X6 ActiveHybrid

MW X6 ActiveHybrid

ActiveHybrid X6 (2009–)

 

The BMW Concept X6 ActiveHybrid is the concept vehicle of BMWs first full-hybrid vehicle and was revealed at the Internationale Automobil-Ausstellung Frankfurt in September 2007. BMWs first mild-hybrid BMW Concept 7 Series ActiveHybrid Generation 1 was revealed at the Paris Motor Show in October 2008. Both cars made their market debuts at the end of 2009 and the X6 Hybrid can drive in pure electrical mode at low speeds. The Active Hybrid 7 Generation 1 does not have this ability.

 

The BMW Concept X6 ActiveHybrid uses the V8 Twin Turbo with High Precision Injection that powers the BMW X6 xDrive50i.

 

A defining feature of the BMW Concept X6 ActiveHybrid is its Two-Mode active transmission, an innovative technology that controls the interplay of the electrical motors and the internal combustion engine. The car can operate in two modes: mode 1 delivers high torque when pulling away from a standing start and at low speeds, while mode 2 is suited for higher speeds. The result is that the car always uses the available power resources in the most efficient possible way, whatever speed it is travelling at.

 

The ActiveHybrid X6 made its world premiere at the Frankfurt Motor Show (IAA) in September 2009.

 

In late 2009, BMW introduced an X6 featuring a version of the Global Hybrid Cooperation hybrid power train, popularly known as the two-mode hybrid system. This car was confirmed as being called the BMW ActiveHybrid X6, and it is the world's most powerful hybrid vehicle; it is not sold in the UK. The production vehicle was unveiled alongside a 7 Series hybrid at the 2009 Frankfurt Motor Show. The ActiveHybrid X6 went on sale in December 2009 in the US market with a base price of US $89,765.

 

The drive system featured in the BMW ActiveHybrid X6 consists of a 300 kW (407 hp) V8 power unit with BMW TwinPower Turbo Technology and two electric engines developing 67 kW (91 hp) and, respectively, 63 kW (86 hp.) Maximum system output is 357 kW (485 hp), peak torque is 780 Newton-meters (575 lb-ft.)

 

BMW ActiveHybrid technology offers the driver three significant options: to drive under electric power alone, to use the power of the combustion engine, or to benefit from the combination of both drive modes for short periods of maximum acceleration, using the 485 maximum. Driving completely free of CO2 in the electric mode is possible up to a speed of 37 mph (60 km/h). The hybrid also employs stop-start technology and other energy saving measures to help improve efficiency. The core-vehicle is however very heavy and the petrol power unit limits the extent to which fuel consumption can be reduced in absolute terms. The Turbo-Diesel models in the X6 range use less fuel, for example.

 

 BMW X6 xDrive35d (Australia)

Dynamic Performance Control

 

The X6 marks BMW's first use of its new Dynamic Performance Control system, which works in unison with xDrive all-wheel drive, both being standard on the X6. DPC is a drivetrain and chassis control system that works to regulate traction and especially correct over- and understeer by actively spreading out drive forces across the rear axle. Torque is split not only between the front and rear wheels (xDrive) but also from side to side at the rear for improved agility and added stability (through the DPC rear axle).

 

The DPC differential features clutch packs on both output sides that are actuated by an electric motor. The clutch pack activates a planetary gearset which causes one wheel to be overdriven. A conventional control system will use the brakes to reduce the speed of the faster moving wheel (which is the one with less traction)and reduce engine power. This leads to increased brake wear and slower than optimal progress. The DPC system speeds up the slower moving wheel (the one with the most traction) in order to maintain stability when needed. For example; while turning, the outer wheel is overdriven to provide greater acceleration using the traction advantage through the dynamic loading of the outboard wheel in cornering. In an oversteer situation, the inner wheel is overdriven to regain traction balance.

Production and sales

Calendar year  Total production (X6)(X6M)          US sales (hybrid)

2008                 26,580  4,548

2009                 41,667                                         4,787

2010                 46,404 (3,082)                             6,257 (248)

2011                                                                      6,192

Home | Contact Us | Blog | Email: mill1546@comcast.net | Contact Paul Miller: 678-978-6995