BMW E3 1968-1977





BMW New Six


The BMW New Six is a line of six-cylinder luxury cars produced by the German automaker BMW from 1968 to 1977. The series -which uses the M30 engine- was introduced as a response to the Mercedes-Benz-dominated large luxury car class and was very important in establishing BMW's reputation as a maker of sporting, luxury sedans. A two-door coupé version was produced alongside. Racing versions of the coupé enhanced BMW's reputation in auto racing. The sedans have the internal name E3, while the coupés are E9.


Models were given names denoting their engine sizes, and suffixes to indicate the long-wheelbase (L) and fuel injection (i) available on later cars. The coupés were all named CS, followed by i (for fuel injection models) or L (for light-weight models, which also had fuel injection and higher power).


    2500/2.5, 2.5CS (2478 cc, 150 PS (110 kW; 148 hp))

    2800/2.8, 2800CS (2769 cc, 170 PS (125 kW; 168 hp))

    3.0S, 3.0CS (2966 cc, 180 PS (132 kW; 178 hp) using twin Zenith 35/40 INAT carburetors)

    3.0Si, 3.0Li, 3.0CSi (2966 cc, 200 or 195 PS (143 kW; 192 hp), depending whether Bosch

    D-Jetronic or L-Jetronic was installed)

    3.3Li (3188 cc, 200 PS (147 kW; 197 hp))


The two initial models, introduced in 1968 and sold through 1977, were the 2.5 L 2500 and 2.8 L 2800. In 1971, the Bavaria, made exclusively for America, replaced the 2500/2800 models, but used the 2.8 L engine with some interior features stripped out to give a more attractive price, about US$5,000, less than the $6,874 of its full-featured predecessor, the 2800.


They were roomy 6-cylinder cars that handled well and impressed contemporary reviewers. Road & Track called the Bavaria "delightful" and "superb", concluding that it was "one of the world's best buys". The big-bore, dual-carbureted 3.0S was introduced in 1971. It was more powerful and expensive than the 2800; a fuel-injected version was also made. Also produced were long-wheelbase L models (3.0L, 3.3Li, etc.), whose sharp handling was a stark contrast to the large Mercedes-Benz models of the time. Langley Motors in Thames Ditton UK also produced an estate (tourer) version.


In the US market, the 2500 and 2800 were introduced in 1969. The 2500 was shy of many of the luxury features included in the 2800, and with the smaller engine, it sold for about $5600 in 1970.[1] The 2800 sedan was heavily optioned with such things as full leather interior, power windows, and power sunroof, which its price of $6,874 reflected. For the 1971 model year Max Hoffman, the BMW importer for the USA, convinced BMW AG to build the 2500 configuration car but use the 2800 engine — i.e. the classic "American hotrod" formula of taking the lower option, lighter weight chassis and fitting the largest engine. This new E3 configuration was called the "Bavaria" and was unique to the US market. Hence the 1971 E3 sedans available in the US were, initially, the 2500, and 2800, then the Bavaria replacing the former models. The Bavaria is generally considered the forebear of the modern BMW high-performance sedan as it combined excellent acceleration, good fuel economy, plenty of room for four people and a large trunk. The majority of them were sold with a four-speed manual transmission, reflecting the sporting nature of the sedan. With a fully independent suspension along with four wheel disc brakes, the E3 was well ahead of its time in the early 1970s.


For the 1972 model year, the 2500 was dropped while the M30 engine size in the Bavaria was increased to 3.0 liters. The former 2800 was now called the 3.0S reflecting the 3.0 liter engine. These two models, the 3.0S and the Bavaria, were the E3 sedan line-up for 1972 through 1974. However, in 1974 the E3 received the ungainly, federally mandated 5 mph (8.0 km/h) bumpers front and rear significantly altering its profile.


In 1975 BMW introduced fuel injection to the US market for the big-six M30 motor replacing the twin two-barrel Zenith carburetors used on the M30 motor since its inception. The Bavaria was dropped from the line-up, and the 3.0Si was now the highest end of the BMW model range (the "i" added to the 3.0S to designate fuel injection). The bargain end of the 6-cylinder sedan range was now the newly introduced E12 530i. The fully optioned 3.0Si was sold during the 1975 and 1976 model years.


The E3 Sedan was in production from 1968–1978, with a total of 221,991 units produced.

BMW New Six

BMW 3.0—E3 "New Six" sedan

Manufacturer  BMW

Production  1968–1977

221,991 built

Successor  BMW E23 (BMW 7-Series)

Body style  4-door sedan

2-door coupe

Layout  FR layout

Platform  BMW E3 (Sedan)

BMW E9 (Coupe)

Engine  2.5L I6

2.8L I6

3.0L I6

3.3L I6

Transmission  4 speed manual

3 speed automatic

Bavaria Production:

model  2800 Bav  3.0 Bav

1968  2 

1969  13,211 

1970  13,210 

1971  4,817  8,414

1972  2,571  8,206

1973  2,371  8,286

1974  948  4,506

1975  14  2,548

1976   2,578

1977   122

totals  37,144  34,660

The oxidized aluminum kit is for BMW, Jaguar, Mercedes, Volvo, Saab, Volkswagen, and many others.  This flexible deoxidizer lasts indefinitely.  After the surfaces are prepared following the directions on the included DVD, the deoxidizer is applied with the applicator using a flow on motion. The oxidized look immediately disappears, leaving an original factory look.

The kit includes all materials necessary to achieve a professional end result.


This Kit is:

$49.95 Plus $10.00 Shipping.

We offer a 30 day money back guarantee.

     Rocker Panel Refinishing Kit            

Designed for BMW 3-5-7 Series

This highly pigmented, water based polymer is able to be brushed on because it is the consistency of water with an extraordinary ability to cover. Apply with a foam brush, included in the kit, for a seamless end result every time. Dries quickly, maintains detail, and leaves no brush strokes. No Spraying necessary. Kit includes Cleaner, Coating, Brushes, and instructional DVD.


This Kit is $49.95 Plus $10.00 Shipping

We offer a 30 day money back guarantee.


Anodize Stripping Kit

This kit allows you to restore those older anodized aluminum bumpers back to a fresh new look. This kit includes a water based anodize stripper which works quickly to get the old faded anodizing off, and down to the raw aluminum. A durable finishing coat is included along with a full length video, sandpaper, and aluminum polish. Kit treats 2 bumpers. We offer a 30  day money back guarantee.


This Kit is $69.95 Plus $10.00 Shipping


Rubber Rebuilder Kit

This kit was designed for older cars which have oxidized and pitted rubber trim pieces. These trim pieces are expensive new, and used ones usually look the same as what you have. Multiple coats of the  water based coating  are applied then sanded, filling all pitts.  A final coat is then applied leaving a satin finish. The coating remains flexible for an indefinite period of time. Kit contains: coating, cleaner, sandpaper, brushes, and instructional DVD.


This Kit is $39.95 Plus $10.00 Shipping. We offer a 30 day money back guarantee.

Home | Contact Us | Blog | Email: | Contact Paul Miller: 678-978-6995